







eCharge 40 Amp Level 2 EV Charger

PRODUCT DESCRIPTION
For EV drivers who need their vehicle charged and ready on a schedule — not whenever it finishes charging overnight — the Battery Tender® eCharge 40 Amp Level 2 delivers the speed. At 40 Amps on a 240V circuit, it provides approximately 9.6 kW of charging power, adding roughly 25–30 miles of driving range per hour. Most long-range EV batteries recover fully in 6–9 hours. Park, plug in, wake up to a full charge — every morning. Energy Star certified for maximum charging efficiency throughout the process.
Level 2 Charging: The Practical Home Standard
Level 2 charging at 240V is the standard for daily home EV charging because it recovers meaningful range in a standard overnight window for virtually any EV on the market. Where Level 1 on 120V takes 40+ hours to fully charge a depleted long-range EV battery, Level 2 at 40 Amps accomplishes it in 6–9 hours. For EV owners who drive significant daily mileage, own long-range EVs, or simply need charging certainty on a predictable schedule, Level 2 is the correct solution.
40 Amps — Faster Than 32, Compatible With Higher-Capacity EVs
Higher output means faster charging for vehicles whose onboard charger can accept it. At 40 Amps, the eCharge 40 Amp Level 2 adds range faster than 32 Amp units and is matched to EVs with onboard chargers in the 7.2 kW to 9.6 kW range — which covers a large portion of current EV models. Where a vehicle's onboard charger cannot accept the full 40 Amp output, the eCharge unit delivers at the vehicle's accepted rate without issue.
eCharge Level 2 Speed Comparison
- eCharge 32 Amp Level 2: ~7.7 kW · ~20–25 miles of range per hour
- eCharge 40 Amp Level 2: ~9.6 kW · ~25–30 miles of range per hour
- eCharge 48 Amp Level 2: ~11.5 kW · ~30–36 miles of range per hour
Actual range added per hour varies by vehicle onboard charger capacity and battery efficiency. Vehicle onboard charger capacity is always the limiting factor.
J1772 Standard Connector
Compatible with all J1772 non-Tesla electric vehicles and plug-in hybrids sold in North America. J1772 is the industry standard for Level 1 and Level 2 EV charging across all major domestic and international manufacturers.
RFID Access Control
Built-in RFID card reader enables access control and usage tracking — useful for residential installations shared between multiple drivers, rental properties, commercial parking, or fleet charging locations where access management is needed.
Energy Star Certified
The eCharge 40 Amp Level 2 is Energy Star certified — meeting EPA energy efficiency guidelines for EV charging equipment. Energy Star certification ensures minimized standby power draw and optimized charging efficiency, reducing the total cost of operation over the life of the unit.
Electrical Requirements
Requires a dedicated 240V, 50 Amp circuit. Can be hardwired or connected via NEMA 14-50 outlet. Professional installation by a licensed electrician is recommended.
Compatible Vehicles
Compatible with all J1772 non-Tesla battery electric vehicles and plug-in hybrids sold in North America — all major domestic and international manufacturers.
Safety Features
- GFCI ground fault circuit interrupter protection
- Overcurrent protection
- Temperature monitoring and thermal management
- Weatherproof rated for indoor and outdoor installation
- UL Listed
- Energy Star certified
Limited Warranty | DeLand, Florida Since 1965
Frequently Asked Questions
SHOP BY CATEGORY



















