{"title":"Overlanding Portable Power","description":"\u003cp\u003eGo further off the grid with Battery Tender® portable power solutions for overlanding and off-road adventure. Our rugged portable chargers, lithium jump starters, and solar-compatible charging accessories are built to perform in demanding terrain and extreme conditions. Charge from your vehicle, solar panel, or shore power — and keep auxiliary batteries, communications gear, and recovery tools powered when you're miles from the nearest outlet. Battery Tender® overlanding power products are engineered for explorers who refuse to be limited by the edge of the pavement.\u003c\/p\u003e","products":[{"product_id":"1500amp-jumpstarter","title":"Jump N Start 1500 Amp Lithium Jump Starter","description":"\u003cp\u003eMore peak cranking power. More battery capacity. More jump starts per charge. The Battery Tender® 1500 Amp Lithium Jump Starter is the portable car battery jump starter for drivers who want the extra headroom — 1500 peak Amps for larger engines, cold-weather starts, and hard-to-start vehicles, combined with a 12,000mAh power bank that charges devices multiple times and supports more jump start cycles before recharging. Handles any 12V gas engine up to V8 and diesel engines up to 7.0L.\u003c\/p\u003e\u003ch3\u003e1500 Peak Amps — Built for Bigger Engines and Harder Starts\u003c\/h3\u003e\u003cp\u003e1500 peak Amps delivers significantly more cranking power than 600 or 800 Amp units — the right specification for large displacement engines, diesel trucks, RVs, vehicles with high-compression engines, and any cold-weather start where battery output is reduced and extra cranking power is the margin between starting and staying stranded. Handles gas engines up to V8 and diesel engines up to 7.0L.\u003c\/p\u003e\u003ch3\u003eThe Best Portable Jump Starter for Cold Weather\u003c\/h3\u003e\u003cp\u003eCold temperatures reduce battery output dramatically — a battery that starts fine in summer may fail in below-freezing temperatures. Lithium jump starters maintain consistent peak Amp output in cold weather far better than lead-acid jump boxes, which lose significant capacity as temperatures drop. The 1500 Amp specification provides the buffer needed to start cold, marginally charged, or aging batteries that lower-output units cannot turn over.\u003c\/p\u003e\u003ch3\u003e12,000mAh Lithium Battery Pack\u003c\/h3\u003e\u003cp\u003eAt 12,000mAh — nearly double the capacity of the 600 Amp unit — the Battery Tender® 1500 Amp supports more jump start cycles on a single charge and provides substantial USB charging capacity for phones, tablets, and USB-C devices. A larger internal battery means less frequent recharging and more confidence that the jump starter is ready after extended storage.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Car Battery\u003c\/h3\u003e\u003cp\u003eWith the Battery Tender® 1500 Amp, jump starting a dead car battery without jumper cables takes under two minutes:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConnect the red clamp to the positive (+) terminal on the dead battery\u003c\/li\u003e\n\u003cli\u003eConnect the black clamp to a ground point or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eSpark-proof connection technology confirms polarity before any current flows\u003c\/li\u003e\n\u003cli\u003eStart the vehicle — crank for up to 5 seconds per attempt with 30 seconds between attempts\u003c\/li\u003e\n\u003cli\u003eOnce running, disconnect clamps and store the jump starter\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eNo second vehicle. No waiting. No cable management. The 1500 Amp provides the cranking power to start most gas and diesel engines, even after extended discharge.\u003c\/p\u003e\u003ch3\u003ePortable Jump Starter That Fits Under the Seat\u003c\/h3\u003e\u003cp\u003eDespite 1500 peak Amps and a 12,000mAh battery, the Battery Tender® 1500 Amp remains compact enough for under-seat, trunk, or center console storage. Lithium technology delivers more power in less space than lead-acid alternatives — keeping the jump starter in the vehicle full-time without meaningful storage sacrifice.\u003c\/p\u003e\u003ch3\u003eUSB Power Bank — Useful Every Day\u003c\/h3\u003e\u003cp\u003eThe 12,000mAh battery charges phones, tablets, and electronics between jump start events — making the 1500 Amp a daily-use portable power bank that stays charged because it's used regularly, not a device that sits discharged when the emergency finally arrives.\u003c\/p\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-size trucks, SUVs, and pickup trucks\u003c\/li\u003e\n\u003cli\u003ePassenger cars and sedans\u003c\/li\u003e\n\u003cli\u003eMotorcycles and touring bikes\u003c\/li\u003e\n\u003cli\u003eBoats and marine vessels\u003c\/li\u003e\n\u003cli\u003eRVs and campers\u003c\/li\u003e\n\u003cli\u003eATVs, UTVs, and off-road vehicles\u003c\/li\u003e\n\u003cli\u003eAny 12V gas engine up to V8 or diesel engine up to 7.0L\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof clamp technology\u003c\/strong\u003e — no current flows until connection is confirmed correct\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e — alerts and prevents current flow if clamps are reversed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOver-temperature protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082181648482,"sku":"030-2020-WH","price":152.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-1500-amp-jump-starter-12000mah-power-bank-030-2020-wh-30744381358178.jpg?v=1738849060"},{"product_id":"2000amp-jumpstarter","title":"Jump N Start 2000 Amp Lithium Jump Starter","description":"\u003cp\u003eMaximum portable jump starting power. The Battery Tender® 2000 Amp Lithium Jump Starter delivers 2000 peak Amps of cranking power for any 12V gas or diesel engine up to V8 — the highest-output standard portable jump starter in the Battery Tender® lineup. For full-size diesel trucks, large engines, extreme cold weather starts, and vehicles that have defeated lower-output jump starters before, 2000 Amps is the specification that starts what others cannot. Backed by a 16,000mAh power bank for multiple jump start cycles and serious device charging capacity.\u003c\/p\u003e\u003ch3\u003e2000 Peak Amps — When Lower-Output Jump Starters Fall Short\u003c\/h3\u003e\u003cp\u003eThere are situations where 600, 800, or even 1500 Amp units are not enough: large displacement diesel pickups, high-compression performance engines, deeply discharged batteries in extreme cold, and vehicles that simply require more cranking power to turn over. 2000 peak Amps is the specification built for those situations — and for drivers who want to carry the most capable portable car battery jump starter available without commercial-grade equipment.\u003c\/p\u003e\u003ch3\u003e16,000mAh Lithium Battery Pack\u003c\/h3\u003e\u003cp\u003eThe 16,000mAh internal lithium battery is the largest capacity in the Battery Tender® portable jump starter lineup — providing more stored energy for more jump start cycles per charge and more USB device charging capacity. For drivers managing multiple vehicles or for commercial use where the jump starter may be used frequently, the larger battery means less time recharging and more time ready.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Car — Faster Than Jumper Cables\u003c\/h3\u003e\u003cp\u003eJump starting a car with a portable battery jump starter is safer and faster than traditional jumper cables:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConnect the red clamp to the positive (+) terminal on the dead battery\u003c\/li\u003e\n\u003cli\u003eConnect the black clamp to a ground point or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eThe spark-proof safety system confirms polarity before any current flows — no guessing, no risk of reverse connection\u003c\/li\u003e\n\u003cli\u003eAttempt to start the vehicle — crank for up to 5 seconds, wait 30 seconds between attempts\u003c\/li\u003e\n\u003cli\u003eOnce running, disconnect clamps and store the unit\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eTraditional jumper cables require a second vehicle with a charged battery, nose-to-nose positioning, and the correct connection order. The Battery Tender® 2000 Amp portable jump starter requires none of that — and at 2000 peak Amps, handles engines that most portable units cannot.\u003c\/p\u003e\u003ch3\u003eLithium vs. Lead-Acid Jump Starters\u003c\/h3\u003e\u003cp\u003eLead-acid jump boxes are heavy, lose charge rapidly in storage, and lose output significantly in cold temperatures — the exact conditions when a dead battery is most likely and most urgent. The Battery Tender® 2000 Amp lithium jump starter maintains consistent peak Amp output in cold weather, holds charge for months between uses, and weighs a fraction of equivalent lead-acid units.\u003c\/p\u003e\u003ch3\u003eUSB Power Bank — Daily Carry Justification\u003c\/h3\u003e\u003cp\u003eMultiple USB outputs charge phones, tablets, and electronics from the 16,000mAh lithium battery between jump starts — making the 2000 Amp a portable power bank with a jump starting function rather than an emergency device that sits unused. A device used daily is a device kept charged.\u003c\/p\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-size trucks, diesel pickups, and large SUVs\u003c\/li\u003e\n\u003cli\u003ePassenger cars and sedans\u003c\/li\u003e\n\u003cli\u003eMotorcycles and touring bikes\u003c\/li\u003e\n\u003cli\u003eBoats and marine vessels\u003c\/li\u003e\n\u003cli\u003eRVs and campers\u003c\/li\u003e\n\u003cli\u003eATVs, UTVs, and off-road vehicles\u003c\/li\u003e\n\u003cli\u003eAny 12V gas engine up to V8 or diesel engine up to 8.0L\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof clamp technology\u003c\/strong\u003e — no current flows until connection is confirmed correct\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e — alerts and prevents current flow if clamps are reversed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOver-temperature protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082181746786,"sku":"030-2030-WH","price":179.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-2000-amp-jump-starter-16000mah-power-bank-030-2030-wh-30744384340066.png?v=1766428647"},{"product_id":"2000amp-jumpstarter-100watt-inverter","title":"Jump N Start 2000 Amp Power Station with 100W Inverter","description":"\u003cp\u003eThe Battery Tender® 2000 Amp Power Station is the portable jump starter that does everything else too. 2000 peak Amps of lithium cranking power for any 12V gas or diesel engine up to V8, a 100-watt AC inverter for running electronics and small appliances anywhere there is no outlet, three USB outputs for simultaneous device charging, and a 16,000mAh battery pack built for multiple jump starts and extended power delivery. The best portable jump starter for drivers, campers, overlanders, and anyone who needs backup power beyond what a phone charger provides.\u003c\/p\u003e\u003ch3\u003e2000 Peak Amps — Maximum Portable Jump Starting Power\u003c\/h3\u003e\u003cp\u003e2000 peak Amps handles the hardest starts — large diesel trucks, full-size SUVs, high-compression engines, cold-weather starts, and deeply discharged batteries in vehicles that have defeated smaller jump starters. Spark-proof connection technology and reverse polarity protection confirm the connection before any current flows, regardless of lighting or urgency.\u003c\/p\u003e\u003ch3\u003e100-Watt AC Inverter — Wall Power Anywhere\u003c\/h3\u003e\u003cp\u003eThe integrated 100W AC inverter converts the 16,000mAh lithium battery pack to standard 120V AC output — powering laptops, power tools, CPAP machines, LED work lights, and any device that requires a wall outlet. For job sites, camping trips, overlanding, tailgating, boat trips, and power outages, the 100W inverter transforms this portable jump starter into a portable power station in a glove-compartment-sized unit.\u003c\/p\u003e\u003cp\u003eThis is what separates the 2000 Amp Power Station from the standard 2000 Amp jump starter — AC power output. For anyone who has ever needed to charge a laptop, run a small appliance, or power equipment away from an outlet, the inverter is the decisive feature.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Car Without Jumper Cables\u003c\/h3\u003e\u003cp\u003ePortable lithium jump starters are faster, safer, and more reliable than traditional jumper cables:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConnect the red clamp to the positive (+) terminal on the dead battery\u003c\/li\u003e\n\u003cli\u003eConnect the black clamp to a ground point or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eSpark-proof technology confirms polarity before current flows — reverse polarity protection prevents damage from incorrect connections\u003c\/li\u003e\n\u003cli\u003eStart the vehicle — most engines start within 1–3 attempts; crank for up to 5 seconds and wait 30 seconds between attempts\u003c\/li\u003e\n\u003cli\u003eOnce running, disconnect and store\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eNo second vehicle needed. No cable management. 2000 peak Amps handles the full range of gas and diesel engines in one compact portable unit.\u003c\/p\u003e\u003ch3\u003eThree USB Outputs — Charge Multiple Devices Simultaneously\u003c\/h3\u003e\u003cp\u003eThree USB charging ports deliver simultaneous fast charging for phones, tablets, and accessories from the same 16,000mAh battery that powers the jump starter and inverter. The combination of USB outputs, the 100W AC outlet, and 2000 peak Amp jump starting covers virtually every power need in one portable battery jump starter pack.\u003c\/p\u003e\u003ch3\u003ePortable Power Applications Beyond Jump Starting\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLaptops and work equipment on remote job sites\u003c\/li\u003e\n\u003cli\u003eCPAP and medical devices during travel or power outages\u003c\/li\u003e\n\u003cli\u003eLED work lighting for emergency roadside repairs\u003c\/li\u003e\n\u003cli\u003eCamping and overlanding power for small appliances\u003c\/li\u003e\n\u003cli\u003eTailgating and outdoor events\u003c\/li\u003e\n\u003cli\u003eEmergency backup power during home outages\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-size trucks, diesel pickups, and commercial vehicles\u003c\/li\u003e\n\u003cli\u003eLarge SUVs and passenger cars\u003c\/li\u003e\n\u003cli\u003eMotorcycles and touring bikes\u003c\/li\u003e\n\u003cli\u003eBoats and marine vessels\u003c\/li\u003e\n\u003cli\u003eRVs and campers\u003c\/li\u003e\n\u003cli\u003eATVs, UTVs, and off-road vehicles\u003c\/li\u003e\n\u003cli\u003eAny 12V gas engine up to V8 or diesel engine up to 8.0L\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof clamp technology\u003c\/strong\u003e — no current flows until connection is confirmed correct\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e — alerts and prevents current flow if clamps are reversed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e100W AC inverter surge protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOver-temperature protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082181779554,"sku":"030-2040-WH","price":234.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-2000-amp-power-station-with-100-watt-inverter-030-2040-wh-30744385585250.png?v=1769191168"},{"product_id":"800amp-jumpstarter-tireinflator","title":"Jump N Start 800 Amp Jump Starter and Tire Inflator","description":"\u003cp\u003eTwo of the most common roadside breakdowns — dead battery and flat tire — solved by one portable device. The Battery Tender® 800 Amp Jump Starter and Tire Inflator combines a lithium jump starter powerful enough for V8 engines with a built-in air compressor that inflates a standard car tire from completely flat to full in eight minutes. No jumper cables. No gas station air pump. No roadside assistance. One compact unit that fits in the trunk and handles both emergencies.\u003c\/p\u003e\u003ch3\u003e800 Peak Amps — Starts V8 Gas and Diesel Engines\u003c\/h3\u003e\u003cp\u003eAt 800 peak Amps, this portable car battery jump starter handles any 12V gas engine up to V8 and diesel engines up to 5.0L — full-size passenger vehicles, SUVs, trucks, and larger vehicles that smaller 600 Amp units cannot start. The spark-proof safety system confirms the connection before current flows, protecting the vehicle's electronics and the unit regardless of lighting conditions or urgency.\u003c\/p\u003e\u003ch3\u003eBuilt-In Air Compressor — Jump Starter with Tire Inflator\u003c\/h3\u003e\u003cp\u003eThe integrated air compressor inflates a standard passenger car or SUV tire from completely flat to full in approximately eight minutes. Digital PSI display and auto-stop at preset pressure take the guesswork out of inflation. No gas station. No separate pump to carry. Works for car and truck tires, bicycle tires, motorcycle tires, sports equipment, and inflatable accessories — one tool that covers every inflation need.\u003c\/p\u003e\u003cp\u003eThis is the jump starter with air compressor that replaces two roadside emergency tools with one compact unit.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Car Without Jumper Cables\u003c\/h3\u003e\u003cp\u003eJump starting a car is faster and safer with a portable jump starter than with traditional jumper cables:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConnect the red clamp to the positive (+) terminal on the dead battery\u003c\/li\u003e\n\u003cli\u003eConnect the black clamp to a ground point or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eSpark-proof technology confirms the connection before current flows\u003c\/li\u003e\n\u003cli\u003eStart the vehicle — most engines respond within 1–3 attempts\u003c\/li\u003e\n\u003cli\u003eDisconnect and store\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eTraditional jumper cables require a second vehicle, correct nose-to-nose positioning, and knowledge of connection sequence. The Battery Tender® 800 Amp requires none of that — and handles V8 engines that many portable jump starters cannot.\u003c\/p\u003e\u003ch3\u003eUSB Power Bank for Daily Use\u003c\/h3\u003e\u003cp\u003eThe internal lithium battery powers the jump starter, the air compressor, and USB charging outputs from the same stored charge. USB outputs charge phones and tablets when neither the jump start nor the inflation function is needed — making this a portable power bank that earns its daily carry justification beyond emergency use.\u003c\/p\u003e\u003ch3\u003eWhy Lithium Beats Lead-Acid in a Portable Jump Starter\u003c\/h3\u003e\u003cp\u003eLead-acid jump boxes are heavy, lose charge in storage, and lose output capacity in cold temperatures. Lithium technology delivers consistent peak Amps in cold weather when batteries are hardest to start, holds charge for months between uses, and weighs significantly less than equivalent lead-acid units.\u003c\/p\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePassenger cars and sedans\u003c\/li\u003e\n\u003cli\u003eFull-size trucks and SUVs\u003c\/li\u003e\n\u003cli\u003eMotorcycles and touring bikes\u003c\/li\u003e\n\u003cli\u003eBoats and marine vessels\u003c\/li\u003e\n\u003cli\u003eRVs and campers\u003c\/li\u003e\n\u003cli\u003eATVs, UTVs, and off-road vehicles\u003c\/li\u003e\n\u003cli\u003eAny 12V gas engine up to V8 or diesel engine up to 5.0L\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof clamp technology\u003c\/strong\u003e — no current flows until connection is confirmed correct\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir compressor auto-stop at preset PSI\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOver-temperature protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082181812322,"sku":"030-3010-WH","price":174.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/030-3010-WH.BatteryTender.01_f83ac0d7-bfd2-484f-aa57-16d02cab2844.jpg?v=1738849072"},{"product_id":"battery-tender-wavecharge-2-bank-selectable-marine-charger-6v-12v-6-amp-onboard-battery-charger-and-maintainer-for-boats-and-outdoor-vehicles","title":"WaveCharge 2-Bank 12V 6 Amp Battery Charger and Maintainer","description":"\u003cp\u003eA boat or vehicle with two battery banks needs two independent chargers — or one WaveCharge. The Battery Tender® WaveCharge 2-Bank is a marine and automotive-grade on-board charging system delivering two completely independent ISM (Infinite Sequential Monitoring™) charging circuits at 3 Amps each, simultaneously maintaining a starting battery and a house battery without interference between banks.\u003c\/p\u003e\u003ch3\u003eBuilt for Multi-Bank Electrical Systems\u003c\/h3\u003e\u003cp\u003eMany boats and vehicles run at minimum two separate battery banks — a dedicated starting battery for the engine and a house battery bank for electronics, accessories, and auxiliary loads. These batteries have different usage patterns, different charge states, and different maintenance requirements. Connecting them to a single-bank charger either undercharges one or overcharges the other. The WaveCharge 2-Bank runs two independent ISM cycles simultaneously, each responding to its own battery's state at full 3 Amps output.\u003c\/p\u003e\u003ch3\u003eIndependent Banks — Not a Splitter\u003c\/h3\u003e\u003cp\u003eEach bank operates as a complete independent 3 Amp charging circuit. Bank 1 can be in bulk charge recovering a depleted house battery while Bank 2 is in float maintenance on a fully charged starting battery — simultaneously, without output reduction on either bank. This is the critical distinction from shared-output charging systems.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium\u003c\/h3\u003e\u003cp\u003eA per-bank chemistry selector delivers the correct ISM profile for either lead-acid or Lithium (LiFePO4) batteries. Each bank is configured independently — Bank 1 can charge a lead-acid starting battery while Bank 2 maintains a Lithium house bank. Full 3 Amps output at the correct chemistry profile on each bank simultaneously.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging on Each Bank\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Individual battery health check before current flows on each bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 3 Amps output restores depleted capacity independently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers per bank as each battery approaches full charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct maintenance protocol for the selected chemistry delivered 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible per bank: 14Ah to 100Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eIP67 Marine and Weatherproof Construction\u003c\/h3\u003e\u003cp\u003eIP67 certification provides complete dust protection and water immersion resistance to 1 meter for 30 minutes. The WaveCharge 2-Bank is designed for permanent installation in marine and automotive environments — engine compartments, battery compartments, and below-deck or under-hood locations where moisture, condensation, and spray are routine.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoats with separate starting and house battery banks\u003c\/li\u003e\n\u003cli\u003eTrucks and SUVs with dual battery systems\u003c\/li\u003e\n\u003cli\u003eOverlanding and expedition vehicles with auxiliary battery banks\u003c\/li\u003e\n\u003cli\u003eCamper vans and custom builds with house and starting batteries\u003c\/li\u003e\n\u003cli\u003eRVs and campers with two-bank 12V systems\u003c\/li\u003e\n\u003cli\u003ePersonal watercraft with dual battery configurations\u003c\/li\u003e\n\u003cli\u003eAny two-bank 12V application requiring independent simultaneous charging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eCharge voltage adjusts automatically based on ambient temperature on each bank for lead-acid applications — ensuring complete charging in cold conditions and preventing overcharge in summer heat, without manual adjustment.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection on each bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection per bank\u003c\/strong\u003e — incorrect connection on one bank does not affect the other\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP67 sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082181910626,"sku":"022-1002-DL-WH","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-wavecharge-2-bank-selectable-12v-or-6v-6-amp-battery-charger-022-1002-dl-wh-59396434461041.png?v=1738849070"},{"product_id":"battery-tender®-wavecharge-9-amp-3-bank-on-board-battery-charger","title":"WaveCharge 3-Bank 12V 9 Amp Battery Charger and Maintainer","description":"\u003cp\u003eThree battery banks. Three independent ISM charging circuits. The Battery Tender® WaveCharge 3-Bank delivers simultaneous independent charging at 3 Amps per bank to boats and vehicles running a starting battery, a house battery bank, and a dedicated electronics, trolling motor, or auxiliary battery — each maintained with the correct chemistry profile and charge stage without interference from the others.\u003c\/p\u003e\u003ch3\u003eThree-Bank Charging for Marine and Automotive Applications\u003c\/h3\u003e\u003cp\u003eLarger powerboats, cruising sailboats, overlanding vehicles, and custom builds with dedicated accessory battery systems routinely run three separate 12V battery banks with different usage patterns and charge requirements. The WaveCharge 3-Bank runs three completely independent ISM cycles at full 3 Amps output per bank — three batteries charging at their own rate, in their own stage, with their own chemistry profile, simultaneously.\u003c\/p\u003e\u003ch3\u003eIndependent Banks at Full Output\u003c\/h3\u003e\u003cp\u003eNo bank shares output with another. Each of the three banks runs its own complete 3 Amp ISM circuit independently. A bank recovering a depleted trolling motor or auxiliary battery at full 3 Amps bulk charge does not reduce output available to the bank holding a fully charged starting battery in float maintenance. All three banks operate at full capacity simultaneously.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium Per Bank\u003c\/h3\u003e\u003cp\u003eEach bank has its own chemistry selector — lead-acid or Lithium (LiFePO4). A boat or vehicle running a lead-acid starting battery, a lead-acid house bank, and a Lithium auxiliary battery can configure each bank independently for the correct charging profile. Full 3 Amps output at the correct chemistry and maintenance protocol on all three banks simultaneously.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging on Each of Three Banks\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Individual health check before current flows on each bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 3 Amps output per bank restores depleted capacity independently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers per bank as each battery approaches full charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct protocol for lead-acid or Lithium on each bank, 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible per bank: 14Ah to 100Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eIP67 Marine and Weatherproof Construction\u003c\/h3\u003e\u003cp\u003eIP67 certified for complete dust protection and water immersion resistance to 1 meter for 30 minutes. Designed for permanent installation in engine compartments, battery bays, and below-deck or under-vehicle locations where moisture exposure is routine.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoats with three-bank electrical systems\u003c\/li\u003e\n\u003cli\u003eTrucks, SUVs, and overlanding vehicles with starting, house, and auxiliary battery banks\u003c\/li\u003e\n\u003cli\u003eCamper vans and custom builds with three independent battery circuits\u003c\/li\u003e\n\u003cli\u003eRVs and campers with separate starting, house, and chassis battery banks\u003c\/li\u003e\n\u003cli\u003eAny three-bank 12V application with mixed or matched battery chemistries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eEach bank adjusts charge voltage automatically based on ambient temperature for lead-acid applications — ensuring correct charging across all three banks in any environment.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection on each bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP67 sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082181976162,"sku":"022-1003-DL-WH","price":214.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-wavecharge-3-bank-selectable-12v-or-6v-9-amp-battery-charger-022-1003-dl-wh-59396436427121.png?v=1738849073"},{"product_id":"battery-tender®-wavecharge-12-amp-4-bank-on-board-battery-charger","title":"WaveCharge 4-Bank 12V 12 Amp Battery Charger and Maintainer","description":"\u003cp\u003eFour battery banks. Four independent ISM charging circuits. The Battery Tender® WaveCharge 4-Bank is the complete on-board charging solution for boats and vehicles with complex multi-bank electrical systems — delivering 3 Amps per bank simultaneously to up to four separate 12V batteries, each running its own ISM (Infinite Sequential Monitoring™) cycle with its own chemistry profile, independently.\u003c\/p\u003e\u003ch3\u003eFour-Bank Charging for Marine and Automotive Applications\u003c\/h3\u003e\u003cp\u003eLarge powerboats, extended-range cruisers, overlanding expedition builds, and custom commercial vehicles running four independent battery banks need four independent charging circuits. The WaveCharge 4-Bank handles all four simultaneously with no output sharing and no inter-bank interference. Each bank charges at its own rate, in its own stage, at its own chemistry setting — exactly as if each battery had its own dedicated charger.\u003c\/p\u003e\u003ch3\u003eFull 3 Amps Output on Every Bank Simultaneously\u003c\/h3\u003e\u003cp\u003eNo bank divides its output with any other. Four independent 3 Amp circuits run simultaneously at full output regardless of what the other banks are doing. A bank in bulk charge recovering a depleted auxiliary battery operates at full 3 Amps without reducing output to the three banks in float maintenance. Complete independence across all four banks at all times.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium Per Bank\u003c\/h3\u003e\u003cp\u003eEach of the four banks has its own chemistry selector. A boat or vehicle running two lead-acid banks and two Lithium banks configures each bank independently — the correct ISM profile for each chemistry on each bank, all running simultaneously at full 3 Amps output.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging on All Four Banks\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Individual health check before current flows on each bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 3 Amps output per bank independently restores depleted capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers per bank as each battery approaches full charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct protocol for lead-acid or Lithium on each bank, 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible per bank: 14Ah to 100Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eIP67 Marine and Weatherproof Construction\u003c\/h3\u003e\u003cp\u003eIP67 certified for complete dust protection and water immersion resistance. Designed for permanent installation in engine compartments, battery bays, and below-deck or under-vehicle locations where moisture, condensation, and spray are routine operating conditions.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge powerboats and cruisers with four-bank electrical systems\u003c\/li\u003e\n\u003cli\u003eBoats with separate starting, house, bow thruster, and trolling or anchor winch batteries\u003c\/li\u003e\n\u003cli\u003eOverlanding and expedition vehicles with four independent battery circuits\u003c\/li\u003e\n\u003cli\u003eCommercial trucks and fleet vehicles with complex multi-bank setups\u003c\/li\u003e\n\u003cli\u003eCamper vans and custom builds requiring simultaneous maintenance of four battery banks\u003c\/li\u003e\n\u003cli\u003eAny four-bank 12V application with any combination of lead-acid and Lithium chemistries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eAll four banks adjust charge voltage automatically based on ambient temperature for lead-acid applications — ensuring complete charging and preventing overcharge across all banks in any environment.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection on each bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection per bank\u003c\/strong\u003e — incorrect connection on one bank does not affect the remaining three\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP67 sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082182074466,"sku":"022-1004-DL-WH","price":264.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-wavecharge-4-bank-selectable-12v-or-6v-12-amp-battery-charger-022-1004-dl-wh-59396439605617.png?v=1739196988"},{"product_id":"trolling-motor-plug","title":"Battery Tender® DC Power Connector Kit","description":"\u003cp\u003eThe Battery Tender® DC Power Connector Kit is the marine industry's standard for secure, high-current DC connections — a plug-and-receptacle system engineered for the demands of trolling motors, onboard chargers, electric reels, downriggers, and any DC accessory that requires a reliable, vibration-resistant, waterproof connection on the water.\u003c\/p\u003e\u003cp\u003eThe complete kit includes both the L-shape plug (224-0062-BK) and the onboard receptacle (224-0061-BK) — everything needed to install a permanent, professional-grade DC connection point on any vessel.\u003c\/p\u003e\u003ch3\u003eBuilt for Marine. Proven on the Water.\u003c\/h3\u003e\u003cp\u003eEvery component of the DC Power Connector system is engineered for the marine environment that destroys ordinary connectors. Silver-plated solid copper alloy contacts resist corrosion and deliver consistent low-resistance connections across thousands of connection cycles. A UV-protected, glass-reinforced thermoplastic housing withstands sun exposure, salt air, and impact without cracking or degrading. All hardware is stainless steel throughout — no zinc or plated steel that will corrode in saltwater conditions.\u003c\/p\u003e\u003ch3\u003eScrew-Lock Design — Vibration-Proof, Water-Resistant\u003c\/h3\u003e\u003cp\u003eThe DC Power Connector's unique screw-and-lock mechanism is what sets it apart from push-fit marine connectors. The plug locks into the receptacle with a positive mechanical connection that resists vibration from engine operation, hull impact, and rough water — the conditions that loosen ordinary connectors at the worst possible moment. The lock also creates a water-resistant seal that prevents moisture infiltration at the connection point.\u003c\/p\u003e\u003ch3\u003e80 Amps Continuous. 12V Through 48V.\u003c\/h3\u003e\u003cp\u003eRated for up to 80 Amps continuous service (UL) with 6 AWG wiring, the DC Power Connector handles the full current demands of large trolling motors, high-output onboard chargers, and multi-system DC distribution — at any voltage from 12V through 48V. A single connector system that works across 12V, 24V, 36V, and 48V boat electrical systems without modification.\u003c\/p\u003e\u003ch3\u003eHow the System Works\u003c\/h3\u003e\u003cp\u003eMount the receptacle permanently on the vessel — at the battery bank, the trolling motor mounting point, or the onboard charger location. Connect the plug to the trolling motor, charger output, or accessory cable. Connect and lock in seconds with a positive click. Disconnect cleanly when needed without tools. The permanent receptacle becomes a standardized connection point on the vessel — every compatible device connects the same way, every time, with the same secure locked connection.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrolling motors — 12V, 24V, 36V, and 48V configurations\u003c\/li\u003e\n\u003cli\u003eBattery Tender® WaveCharge and PowerPlus onboard charger connections\u003c\/li\u003e\n\u003cli\u003eElectric reels and downriggers\u003c\/li\u003e\n\u003cli\u003eMarine DC power distribution panels\u003c\/li\u003e\n\u003cli\u003eBow thruster and bilge pump power connections\u003c\/li\u003e\n\u003cli\u003eAny marine DC accessory requiring a secure, weatherproof, high-current connection from 12V to 48V\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDC Power Connector L-Shape Plug (224-0062-BK)\u003c\/li\u003e\n\u003cli\u003eDC Power Connector Receptacle (224-0061-BK)\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage range: 12V – 48V DC\u003c\/li\u003e\n\u003cli\u003eCurrent rating: 80 Amps continuous (UL) \/ 40 Amps continuous (CSA) with 6 AWG wiring\u003c\/li\u003e\n\u003cli\u003eContacts: Silver-plated solid copper alloy\u003c\/li\u003e\n\u003cli\u003eHousing: UV-protected glass-reinforced thermoplastic\u003c\/li\u003e\n\u003cli\u003eHardware: Stainless steel throughout\u003c\/li\u003e\n\u003cli\u003eConnection type: Screw-lock positive engagement\u003c\/li\u003e\n\u003cli\u003ePlug dimensions: 3.1\" D × 1.9\" H × 2.3\" W\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082182238306,"sku":"027-0004-KIT","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-marine-dc-to-dc-power-connector-trolling-motor-plug-for-onboard-marine-12v-027-0004-kit-30744383946850.jpg?v=1738849079"},{"product_id":"battery-tender®-5-45w-automatic-solar-controller","title":"5-45W Automatic Solar Controller","description":"\u003cp class=\"p1\"\u003eOur 5-45W Automatic Solar Controller allows you to convert an existing solar panel into a solar charger using our smart charging capabilities, which prevent overcharging or discharging your batteries.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eCAPACITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMax output of 3 ADC and max input voltage of 32 VDC    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3-STAGE FUNCTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBuilt with 3-stage charging; determines battery connection, voltage and charge level to automatically turn the output load on or off based on the selected battery voltage    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEASY TO USE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeatures a LED battery voltage and status indicator to easily track battery and solar panel status; capable of indicating error status    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSAFETY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeatures protection against reverse connection, overvoltage, short circuit, and over temperature; compatible with 12 volt batteries\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Residents WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm - \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082182500450,"sku":"021-1162","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-5-45w-automatic-solar-controller-021-1162-30744388599906.jpg?v=1738849085"},{"product_id":"battery-tender®-12v-5w-mountable-solar-battery-charger","title":"5 Watt Solar 12V Battery Charger with Handlebar Mount","description":"\u003cp\u003eNo power access? No problem with this 12 Volt, 5 Watt Solar Battery Charger and Maintainer. Use the sun to easily charge and maintain your vehicles battery with the included windshield and handlebar mounts.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eWINDSHIELD MOUNTABLE \u0026amp; VERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMount the solar panel to your vehicle's window or handlebars. Simply connect to the battery using ring terminals or plug in the included OBD II cable. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMART CHARGING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile in the sun, the panel provides full current until switching to float mode to maintain optimal battery voltage levels without overcharging    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis compact solar panel is compatible with lithium (LifeP04), lead acid, flooded, and sealed maintenance-free AGM and gel cell batteries    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePROTECTED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP67 rated weather resistant with spark proof and reverse charging protection; comes with a 5-year manufacturer limited warranty and lifetime customer support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Residents WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm - \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov.\u003c\/a\u003e\u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Resources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReady to install your solar panel?\u003c\/p\u003e\n\u003cp\u003e[\u003ca rel=\"noopener\" title=\"Mounting Template for 5 Watt Solar Panel\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/5Watt_Solar_Panel_Mounting_Template.pdf?v=1752071291\" target=\"_blank\"\u003eHere's a printable solar panel mounting template for easy installation\u003c\/a\u003e]\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082183057506,"sku":"021-1172","price":89.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/BT_5wSolarPanelCharger-00241.jpg?v=1742566790"},{"product_id":"battery-tender®12v-5w-solar-battery-charger-and-maintainer-with-windshield-mount","title":"5 Watt Solar 12V Battery Charger with Windshield Mount","description":"\u003cp\u003eCharge and maintain your vehicle's battery with the sun. Once connected, this Battery Tender® Battery Charger will charge and maintain your battery so it's always ready to go when you are.\u003c\/p\u003e\n\u003cp\u003eLightweight, fully-automatic, and easy to use, the Battery Tender® Solar Panels are the only panels available with a built-in charge controller to prevent overcharging.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSMART CHARGING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile in the sun, the panel provides full current until switching to float mode to maintain optimal battery voltage levels without overcharging  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis compact solar panel is compatible with lithium (LifeP04), lead acid, flooded, and sealed maintenance-free AGM and gel cell batteries    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePROTECTED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP67 rated weather resistant with spark proof and reverse charging protection; comes with a 5-year manufacturer limited warranty and lifetime customer support\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents WARNING: Cancer and Reproductive Harm - \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Resources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReady to install your solar panel?\u003c\/p\u003e\n\u003cp\u003e[\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/5Watt_Solar_Panel_Mounting_Template.pdf?v=1752071291\" title=\"Mounting Template for Solar Panel\" rel=\"noopener\" target=\"_blank\"\u003eHere's a printable solar panel mounting template for easy installation\u003c\/a\u003e]\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082183319650,"sku":"021-1171","price":74.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/021-1171.BatteryTender.01_Edit.jpg?v=1740409027"},{"product_id":"battery-tender®-12v-17-watt-mountable-solar-battery-charger","title":"17 Watt Mountable Solar 12V Battery Charger with Solar Controller","description":"\u003cp\u003eCharge and maintain your vehicle's battery with the sun. Once connected, this Battery Tender® Battery Charger will charge and maintain your battery so it's always ready to go when you are. \u003c\/p\u003e\n\u003cp\u003eLightweight, fully-automatic, and easy to use, the Battery Tender® Solar Panels are the only panels available with a built-in charge controller to prevent overcharging.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMOUNTABLE \u0026amp; VERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEasily mount to outdoor surfaces with 4 included mounting holes.  Harness and regulate solar energy in areas without power access    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMART CHARGING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrevent overcharging and battery discharging with the controller's 3-step charging process.  LED indicator light displays current charging status    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis compact solar panel is compatible with lithium (LifeP04), lead acid, flooded, and sealed maintenance-free AGM and gel cell batteries    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePROTECTED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP67 rated weather resistant with spark proof and reverse charging protection; comes with a 5-year manufacturer limited warranty and lifetime customer support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Residents WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm - \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov.\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Resources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReady to install your solar panel?\u003c\/p\u003e\n\u003cp\u003e[\u003ca rel=\"noopener\" title=\"Mounting Template for 17 Watt Solar Panel\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/17Watt_Solar_Panel_Dimesions_Mounting_Template.pdf?v=1752070974\" target=\"_blank\"\u003eHere's a printable solar panel mounting template for easy installation\u003c\/a\u003e]\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082183385186,"sku":"021-1173","price":134.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-17-watt-mountable-solar-12v-battery-charger-with-solar-controller-021-1173-30744404983906.jpg?v=1749825930"},{"product_id":"battery-tender®-12v-35-watt-mountable-solar-battery-charger","title":"35 Watt Mountable Solar 12V Battery Charger with Solar Controller","description":"\u003cp\u003eNo access to power? No problem with this 35-Watt Solar Panel. With built-in Battery Tender® 3-step automatic microprocessor controller, this 100% portable battery charger and maintainer is perfect for storage spaces without power access!\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMOUNTABLE \u0026amp; VERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEasily mount to outdoor surfaces with 4 included mounting holes.  Harness and regulate solar energy in areas without power access    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolar panel, solar charge controller, alligator clips quick disconnect cable, ring terminal quick disconnect cable, 6 foot quick disconnection extension cable, 5 year manufacturer warranty and lifetime customer support    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMART CHARGING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrevent overcharging and battery discharging with the controller's 3-step charging process.  LED indicator light displays current charging status    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis solar panel is compatible with lithium (LifeP04), lead acid, flooded, and sealed maintenance-free AGM and gel cell batteries   \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePROTECTED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP67 rated weather resistant with spark proof and reverse charging protection; comes with a 5-year manufacturer limited warranty and lifetime customer support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Residents WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm - \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov.\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Resources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReady to install your solar panel?\u003c\/p\u003e\n\u003cp\u003e[\u003ca rel=\"noopener\" title=\"Mounting Template for 35 Watt Solar Panel\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/35Watt_Solar_Panel_Dimensions_Mounting_Template.pdf?v=1752070998\" target=\"_blank\"\u003eHere's a printable solar panel mounting template for easy installation\u003c\/a\u003e]\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082183417954,"sku":"021-1174","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-35-watt-mountable-solar-12v-battery-charger-with-solar-controller-021-1174-30744406655074.jpg?v=1739199194"},{"product_id":"battery-tender®-30-amp-12v-24v-mppt-solar-panel-controller","title":"30 AMP, 24V\/12V MPPT Solar Charge Controller","description":"\u003cp\u003eOur 30 AMP solar panel controller efficiently increases battery life and improves performance using efficient MPPT charging. Designed for remote power solar applications, this advanced charge controller can be used with 24 Volt and 12 Volt, lead-acid and AGM batteries, as well as 12 Volt lithium batteries. Once connected, the controller is able to automatically detect the voltage of your battery to select the correct charge from the connected solar panel.\u003c\/p\u003e\u003cp\u003eThe controller's interface includes an LED light which flashes during charging and changes to solid once charging is completed. A four-light indicator tells you the battery charge level and a warning LED helps  identify connection issues.\u003c\/p\u003e\u003cp\u003eWith its three-stage charging from initialization to low voltage protection to low voltage recovery reengagement, you'll always know if you have a correct connection, when your battery is recharging, and when the battery is fully charged.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eCAPACITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMax output of 12VDC and 30 AMPs, and max input voltage of 100 volts, 12 volts at 600 watts or 24 volts at 1200 watts; comes with dual USB ports to charge electronic devices    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3-STAGE FUNCTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBuilt with 3-stage charging; determines battery connection, voltage, and charge level to automatically turn the output load on or off based on the selected battery voltage    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEASY TO USE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeatures an LCD display and LED indicator to easily track battery status; capable of self-diagnosing errors and automatically detects 12 volt\/24 volt batteries    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSAFETY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeatures spark proof and reverse hookup protection; compatible with 12 volt or 24 volt lead acid, AGM, GEL, and 12 volt lithium batteries    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEFFICIENT\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIncreases battery life and performance with MPPT charging, 8 programmable timers, and programmable charging voltage function; temperature sensors for battery charging compensation\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Residents WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm - P65Warnings.ca.gov\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082183581794,"sku":"021-1176","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-30-amp-24v-12v-mppt-solar-panel-controller-021-1176-30744408064098.jpg?v=1738849125"},{"product_id":"battery-tender®-50-amp-12v-24v-36v-48v-pwm-solar-panel-controller","title":"50 AMP, 12V\/24V\/36V\/48V PWM Solar Charge Controller","description":"\u003cp\u003eThis 50 AMP solar panel controller efficiently increases battery life and improves performance using efficient PWM charging. Designed for remote power solar applications, this advanced charge controller can be used with 48 Volt, 36 Volt, 24 Volt, and 12 Volt lead-acid and AGM batteries, as well as 12 Volt lithium batteries. Once connected, the controller is able to automatically detect the voltage of your battery to regulate the charge from a connected solar panel.\u003c\/p\u003e\u003cp\u003eThe controller's interface includes an LED light which flashes during charging and changes to solid once charging is completed. A four-light indicator tells you the battery charge level and a warning LED helps you easily identify connection issues.\u003c\/p\u003e\u003cp\u003eWith its three-stage charging from initialization to low voltage protection to low voltage recovery reengagement, you'll always know if you have a correct connection, when your battery is recharging, and when the battery is fully charged.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eCAPACITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMax output of 12 volt DC and 30 AMPs, and max input voltage of 100 volts, 12 volts at 750 watts, 24 volts at 1,500 watts, 36 volts at 2,250 watts, or 48 volts at 3,000 watts    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3-STAGE FUNCTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBuilt with 3-stage charging; determines battery connection, voltage, and charge level to automatically turn the output load on or off based on the selected battery voltage    EASY TO USE: Features an LCD screen and LED indicator to easily track battery status; capable of self-diagnosing errors and automatically detects the battery voltage    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSAFETY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeatures spark proof and reverse hookup protection; compatible with 12, 24, 36, and 48 volt lead acid, AGM, GEL, and 12 volt lithium batteries    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEFFICIENT\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIncreases battery life and performance with PWM charging, 8 programmable timers, and programmable charging voltage function; temperature sensors for battery charging compensation\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eCalifornia Residents WARNING:\u003c\/strong\u003e Cancer and Reproductive Harm - P65Warnings.ca.gov\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41082183614562,"sku":"021-1177","price":149.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-50-amp-12v-24v-36v-48v-pwm-solar-panel-controller-021-1177-30741439676514.jpg?v=1738849125"},{"product_id":"600amp-jumpstarter","title":"Jump N Start 600 Amp Lithium Jump Starter","description":"\u003cp\u003eThe Battery Tender® 600 Amp is the compact portable lithium jump starter designed to live in your glove compartment — so when your battery dies in a parking garage, a trail head, or a highway shoulder, you have everything needed to jump start your car without jumper cables, without a second vehicle, and without waiting for help. Small enough to forget it's there. Powerful enough to start any V6 gas or diesel engine up to 3.0L the moment you need it.\u003c\/p\u003e\u003ch3\u003ePortable Jump Starter That Goes Where You Go\u003c\/h3\u003e\u003cp\u003eAt 6,400mAh in a glove-compartment-sized housing, the Battery Tender® 600 Amp lithium jump starter is the portable car battery jump starter you keep in the vehicle full-time — not in the garage for the one time a year you remember to bring it. The internal lithium battery holds its charge for months in storage, meaning it's ready when the battery fails, not just when you remembered to top it off last month.\u003c\/p\u003e\u003ch3\u003e600 Peak Amps — The Right Jump Starter for Most Vehicles\u003c\/h3\u003e\u003cp\u003e600 peak Amps starts passenger cars, compact SUVs, motorcycles, ATVs, powersports vehicles, and any gas engine up to V6 or diesel up to 3.0L. For larger engines — full-size trucks, diesel pickups, V8s — see the Battery Tender® 1500 Amp or 2000 Amp jump starter. The 600 Amp is purpose-sized as the everyday portable car jump starter for everyday vehicles.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Car With the Battery Tender® 600 Amp\u003c\/h3\u003e\u003cp\u003eJump starting a car without jumper cables is faster and safer than the traditional two-vehicle method. With the Battery Tender® 600 Amp:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConnect the red clamp to the positive (+) terminal on the dead battery\u003c\/li\u003e\n\u003cli\u003eConnect the black clamp to a ground point or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eThe spark-proof system confirms the connection before any current flows\u003c\/li\u003e\n\u003cli\u003eStart the vehicle — most engines start within 1–3 attempts\u003c\/li\u003e\n\u003cli\u003eDisconnect the clamps and store the jump starter\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eNo second vehicle needed. No cable management. No waiting for roadside assistance. The process takes under two minutes from connection to engine running.\u003c\/p\u003e\u003ch3\u003eJump Starter and Power Bank\u003c\/h3\u003e\u003cp\u003eThe 6,400mAh lithium battery pack doubles as a USB power bank for phones, tablets, and electronics — giving the 600 Amp a daily use case that keeps it in the vehicle and keeps it charged. A portable jump starter you use every day is one you'll actually have when the battery dies.\u003c\/p\u003e\u003ch3\u003eWhy Lithium Jump Starters Outperform Lead-Acid Jump Boxes\u003c\/h3\u003e\u003cp\u003eTraditional lead-acid jump boxes are heavy, lose charge rapidly in storage, and degrade significantly in cold weather. The Battery Tender® 600 Amp lithium jump starter weighs a fraction of lead-acid units, holds charge for months between uses, and delivers consistent peak Amp output even in below-freezing temperatures when batteries are hardest to start.\u003c\/p\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorcycles and touring bikes\u003c\/li\u003e\n\u003cli\u003ePassenger cars and sedans\u003c\/li\u003e\n\u003cli\u003eCompact SUVs and crossovers\u003c\/li\u003e\n\u003cli\u003eATVs, UTVs, and powersports vehicles\u003c\/li\u003e\n\u003cli\u003ePersonal watercraft and small boats\u003c\/li\u003e\n\u003cli\u003eLawnmowers and garden tractors\u003c\/li\u003e\n\u003cli\u003eAny 12V gas engine up to V6 or diesel engine up to 3.0L\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof clamp technology\u003c\/strong\u003e — no current flows until connection is confirmed correct\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e — alerts and prevents current flow if clamps are reversed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOver-temperature protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41150297374818,"sku":"030-1000-WH","price":114.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-600-amp-jump-starter-6400-mah-power-bank-030-1000-wh-30744404131938.jpg?v=1738850906"},{"product_id":"20-amp-onboard-charger","title":"WaveCharge Pro 2-Bank 12V 20 Amp Battery Charger and Maintainer","description":"\u003cp\u003eThe WaveCharge Pro line exists for boats where 3 Amps per bank is not enough. The Battery Tender® WaveCharge Pro 2-Bank delivers 10 Amps per bank — more than three times the output of the WaveCharge line — with UL marine ignition protection, the highest waterproof rating in the WaveCharge family, and the same independent per-bank ISM (Infinite Sequential Monitoring™) architecture that makes WaveCharge the standard for marine multi-bank charging.\u003c\/p\u003e\u003ch3\u003e10 Amps Per Bank — For Larger Batteries and Faster Recovery\u003c\/h3\u003e\u003cp\u003eAt 10 Amps per bank, the WaveCharge Pro 2-Bank recovers large marine house batteries significantly faster. A depleted 150Ah house battery that takes over 50 hours to recover at 3 Amps recovers in approximately 15 hours at 10 Amps — with ISM managing the taper from bulk charge to absorption to float maintenance automatically. For boats with large AGM or Lithium house battery banks, or for commercial boats that need batteries ready on a schedule, Pro output is the practical threshold.\u003c\/p\u003e\u003ch3\u003eUL Marine Ignition Protection\u003c\/h3\u003e\u003cp\u003eCertified to not produce ignition-capable sparks during normal operation or connection in the presence of fuel vapors — the independent certification required for charging equipment installed in enclosed marine spaces near fuel systems. The WaveCharge Pro 2-Bank is certified for installation in engine rooms, fuel-adjacent compartments, and any enclosed marine space where ignition-protected equipment is required.\u003c\/p\u003e\u003ch3\u003eIndependent Banks at Full 10 Amps Output\u003c\/h3\u003e\u003cp\u003eEach bank operates as a complete independent 10 Amp charging circuit. Bank 1 can be in bulk charge recovering a depleted house battery at full 10 Amps while Bank 2 is in float maintenance on a fully charged starting battery — simultaneously, with no output reduction on either bank.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium Per Bank\u003c\/h3\u003e\u003cp\u003eEach bank has its own chemistry selector for lead-acid or Lithium (LiFePO4) batteries, delivering the correct ISM charging profile at full 10 Amps output. Boats transitioning house banks from lead-acid to Lithium can configure each bank independently during the transition.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging on Each Bank at 10 Amps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Individual battery health check before current flows on each bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 10 Amps output per bank restores depleted capacity rapidly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers per bank as each battery approaches full charge, preventing overcharge damage for lead-acid and Lithium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct protocol for the selected chemistry on each bank, 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible per bank: 20Ah to 200Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoats with large starting and house battery banks requiring faster recovery\u003c\/li\u003e\n\u003cli\u003ePowerboats and sailboats with high-capacity AGM or Lithium house batteries\u003c\/li\u003e\n\u003cli\u003eCommercial and charter boats requiring rapid battery turnaround\u003c\/li\u003e\n\u003cli\u003eBoats requiring UL marine ignition protection in engine room installation\u003c\/li\u003e\n\u003cli\u003eAny two-bank 12V marine application where 3 Amps per bank is insufficient\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eBoth banks adjust charge voltage automatically based on ambient temperature for lead-acid applications — ensuring complete charging in cold conditions and preventing overcharge in heat.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL marine ignition protection\u003c\/strong\u003e — certified for enclosed marine spaces and fuel vapor environments\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection on each bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP67+ sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41312404308066,"sku":"022-1007-DL-WH","price":254.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-wavecharge-pro-2-bank-12v-20-amp-battery-charger-022-1007-dl-wh-59391660622193.png?v=1738849160"},{"product_id":"30-amp-onboard-charger","title":"WaveCharge Pro 3-Bank 12V 30 Amp Battery Charger and Maintainer","description":"\u003cp\u003eThree banks. 10 Amps each. 30 Amps total. The Battery Tender® WaveCharge Pro 3-Bank delivers high-output independent charging to three separate marine battery banks simultaneously — with UL marine ignition protection for engine room installation, full Multi-Chemistry support for lead-acid and Lithium, and ISM (Infinite Sequential Monitoring™) managing each bank's full 4-stage charge cycle independently.\u003c\/p\u003e\u003ch3\u003e10 Amps Per Bank on Three Independent Circuits\u003c\/h3\u003e\u003cp\u003eEach of the three banks operates as a complete independent 10 Amp charging circuit. No output is shared between banks. A bank recovering a depleted trolling motor battery at full 10 Amps bulk charge does not reduce the output available to the two banks in float maintenance on fully charged starting and house batteries. Three batteries charged simultaneously at full output, each at its own charge stage.\u003c\/p\u003e\u003ch3\u003eUL Marine Ignition Protection\u003c\/h3\u003e\u003cp\u003eCertified to not produce ignition-capable sparks during normal operation or connection in the presence of fuel vapors. The WaveCharge Pro 3-Bank meets the independent certification requirement for charging devices installed in enclosed marine spaces near fuel systems — engine rooms, fuel-adjacent bilge compartments, and any location where ignition-protected equipment is mandatory.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium Per Bank\u003c\/h3\u003e\u003cp\u003eEach bank has its own chemistry selector. A boat running a lead-acid starting battery, a Lithium house bank, and a lead-acid trolling motor battery configures each bank independently — the correct ISM absorption voltage and float protocol for each chemistry at full 10 Amps output.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging on All Three Banks at 10 Amps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Individual health check on each bank before current flows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 10 Amps output per bank restores depleted capacity rapidly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers per bank independently as each battery approaches full charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct protocol for lead-acid or Lithium on each bank, 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible per bank: 20Ah to 200Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCruising and offshore boats with three-bank systems requiring fast recovery\u003c\/li\u003e\n\u003cli\u003eBoats with separate high-capacity starting, house, and auxiliary battery banks\u003c\/li\u003e\n\u003cli\u003eCommercial and charter boats requiring rapid overnight battery recovery\u003c\/li\u003e\n\u003cli\u003eLiveaboard boats with large Lithium house banks alongside lead-acid service batteries\u003c\/li\u003e\n\u003cli\u003eAny three-bank marine application requiring UL marine ignition protection and high output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eAll three banks adjust charge voltage automatically based on ambient temperature for lead-acid applications — correct charging across all three banks in any marina or offshore environment.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL marine ignition protection\u003c\/strong\u003e — certified for enclosed marine and fuel vapor environments\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection on each bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP67+ sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41312404340834,"sku":"022-1008-DL-WH","price":409.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/022-1008-DL-WH.BatteryTender.01.png?v=1738849171"},{"product_id":"40-amp-onboard-charger","title":"WaveCharge Pro 4-Bank 12V 40 Amp Battery Charger and Maintainer","description":"\u003cp\u003eThe most capable charger in the WaveCharge family. The Battery Tender® WaveCharge Pro 4-Bank delivers 10 Amps per bank across four completely independent charging circuits — 40 Amps total on-board charging capacity — with UL marine ignition protection, full Multi-Chemistry support for lead-acid and Lithium, and ISM (Infinite Sequential Monitoring™) managing each bank's complete 4-stage charge cycle independently and simultaneously.\u003c\/p\u003e\u003ch3\u003eFour Banks. 10 Amps Each. 40 Amps Total.\u003c\/h3\u003e\u003cp\u003eEach of the four banks is a complete independent 10 Amp charging circuit running its own ISM algorithm at its own charge stage with its own chemistry setting. No output sharing. No inter-bank interference. Bank 1 can be recovering a deeply depleted Lithium house bank at full 10 Amps bulk charge while Banks 2, 3, and 4 are simultaneously in float maintenance on fully charged lead-acid service batteries — four different charge stages, four different batteries, one unit.\u003c\/p\u003e\u003ch3\u003eUL Marine Ignition Protection\u003c\/h3\u003e\u003cp\u003eCertified to not produce ignition-capable sparks during operation or connection in the presence of fuel vapors — the certification required for charging devices in enclosed marine spaces near fuel systems. The WaveCharge Pro 4-Bank is rated for installation in engine rooms, fuel-adjacent compartments, and any enclosed marine location where ignition-protected equipment is mandatory.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium Per Bank\u003c\/h3\u003e\u003cp\u003eEach of the four banks has its own chemistry selector. A boat running any combination of lead-acid and Lithium banks across four circuits configures each bank independently — the correct ISM profile at full 10 Amps output for each chemistry on each bank, all running simultaneously.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging on All Four Banks at 10 Amps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Individual battery health check before current flows on each bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 10 Amps output per bank restores depleted capacity rapidly at the correct chemistry setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers per bank as each battery approaches full charge, preventing overcharge for lead-acid and Lithium alike\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct protocol for the selected chemistry on each bank, 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible per bank: 20Ah to 200Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eOne Unit. Complete Coverage.\u003c\/h3\u003e\u003cp\u003eFour individual 10 Amp chargers maintain four batteries with equivalent per-battery results — but require four separate units, four installation locations, and four power connections. The WaveCharge Pro 4-Bank delivers the same independent per-bank ISM performance from a single on-board installation, a single AC connection, and four dedicated output circuits.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge offshore and bluewater cruising boats with four-bank electrical systems\u003c\/li\u003e\n\u003cli\u003eCommercial and charter boats requiring rapid multi-bank recovery between trips\u003c\/li\u003e\n\u003cli\u003eBoats with dedicated starting, house, bow thruster, and trolling or anchor winch batteries\u003c\/li\u003e\n\u003cli\u003eLiveaboard boats with high-capacity mixed lead-acid and Lithium battery systems\u003c\/li\u003e\n\u003cli\u003eAny four-bank 12V marine application requiring UL marine ignition protection and maximum output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eAll four banks adjust charge voltage automatically based on ambient temperature for lead-acid applications — ensuring correct charging across all four banks in any operating or storage environment.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL marine ignition protection\u003c\/strong\u003e — certified for enclosed marine spaces and fuel vapor environments\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection on each bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection per bank\u003c\/strong\u003e — incorrect connection on one bank does not affect the remaining three\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP67+ sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41312404373602,"sku":"022-1009-DL-WH","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/022-1009_w_Clips_1.png?v=1738849171"},{"product_id":"quick-disconnect-usb-c-charger-adapter","title":"Battery Tender® Quick Disconnect USB-C Charger Adapter","description":"\u003cp\u003eThe Battery Tender® Quick Disconnect USB-C Charger Adapter turns any SAE quick disconnect connection point into a USB-C charging port — delivering up to 3 Amps of USB-C charging output from the vehicle's 12V battery through the same SAE connection used for Battery Tender® chargers. Charge USB-C phones, tablets, laptops, and accessories directly from the vehicle battery without an ignition-switched outlet.\u003c\/p\u003e\u003ch3\u003eSAE Quick Disconnect — Plugs Into Any Battery Tender® System\u003c\/h3\u003e\u003cp\u003eThe SAE J563 quick disconnect connector plugs directly into any Battery Tender® ring terminal harness or SAE quick disconnect accessory already installed on the vehicle. No additional wiring or installation required — connect the USB-C Adapter to the existing SAE connection point and USB-C charging is immediately available.\u003c\/p\u003e\u003ch3\u003eUSB-C Output — Up to 3 Amps\u003c\/h3\u003e\u003cp\u003eDelivers up to 3 Amps of USB-C charging output for modern smartphones, tablets, and USB-C powered accessories. Powered directly by the vehicle's 12V battery through the SAE connection. For simultaneous USB-A and USB-C charging from the same connection, see the Battery Tender® Quick Disconnect USB and USB-C Voltage Indicator (081-0159).\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorcycles and powersports vehicles with Battery Tender® ring terminal harnesses installed\u003c\/li\u003e\n\u003cli\u003eBoats and personal watercraft with SAE quick disconnect access points\u003c\/li\u003e\n\u003cli\u003eAny vehicle with a Battery Tender® SAE connection point requiring USB-C device charging capability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible With\u003c\/h3\u003e\u003cp\u003eAll Battery Tender® SAE quick disconnect chargers and accessories — Junior family, Plus family, Weather Resistant, Junior Multi-Chemistry, WaveCharge Standard line, and any SAE J563-compatible equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41363805241442,"sku":"081-0158-C","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-quick-disconnect-usb-c-charger-adapter-081-0158-c-31068684812386.png?v=1738849173"},{"product_id":"lcd-voltage-indicator-quick-disconnect-usb-and-usb-c-charger-adapter","title":"Battery Tender® Quick Disconnect USB and USB-C Voltage Indicator","description":"\u003cp\u003eThe Battery Tender® Quick Disconnect USB and USB-C Voltage Indicator combines two functions in one SAE quick disconnect accessory — a real-time LCD battery voltage display and simultaneous USB and USB-C device charging at up to 3 Amps from the vehicle's 12V battery. Monitor battery state while charging devices, from the same SAE connection point.\u003c\/p\u003e\u003ch3\u003eLCD Voltage Display — Real-Time Battery Monitoring\u003c\/h3\u003e\u003cp\u003eThe LCD display shows battery voltage in real time — not just a color indicator, but an actual voltage reading. Track battery state precisely during charging sessions, monitor voltage drop under load, and verify that a Battery Tender® charger is maintaining the correct float voltage. More information than LED indicators alone.\u003c\/p\u003e\u003ch3\u003eUSB and USB-C Charging — Up to 3 Amps\u003c\/h3\u003e\u003cp\u003eA USB-A port and a USB-C port provide up to 3 Amps total charging output for phones, tablets, GPS units, and accessories — powered directly from the vehicle's 12V battery through the SAE quick disconnect connection. Charge devices from any vehicle with a Battery Tender® ring terminal harness installed without using the vehicle's ignition-switched outlets.\u003c\/p\u003e\u003ch3\u003eSAE Quick Disconnect — Compatible with the Full Battery Tender® System\u003c\/h3\u003e\u003cp\u003eUses the SAE J563 two-pin connector standard, compatible with all Battery Tender® chargers and accessories. Connect to any existing ring terminal harness or SAE quick disconnect system — the voltage indicator sits inline with the connection, monitoring battery state while the USB and USB-C ports charge devices simultaneously.\u003c\/p\u003e\u003ch3\u003eCompatible With\u003c\/h3\u003e\u003cp\u003eAll Battery Tender® SAE quick disconnect chargers and accessories — Junior family, Plus family, Weather Resistant, Junior Multi-Chemistry, WaveCharge Standard line, and any SAE J563-compatible equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41480269299810,"sku":"081-0159","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-lcd-voltage-indicator-quick-disconnect-usb-and-usb-c-charger-adapter-081-0159-31068849602658.png?v=1738849186"},{"product_id":"081-0190-bt","title":"Battery Tender® Quick Disconnect Cable Mount","description":"\u003cp\u003eThe Battery Tender® Quick Disconnect Cable Mount solves one of the most common battery maintenance challenges — accessing the battery connection point on vehicles with enclosed compartments, fairings, or hard-to-reach battery locations. Mount this corrosion-resistant housing to the outside of any enclosure, route the cable inside to the battery terminal, and the SAE quick disconnect connector is permanently accessible on the exterior surface. No more removing seats, panels, or fairings to connect a charger.\u003c\/p\u003e\u003ch3\u003eHow It Works\u003c\/h3\u003e\u003cp\u003eThe Cable Mount installs permanently to an enclosure wall using the included hardware. The ring terminal end routes through the enclosure to the battery terminals. The SAE quick disconnect connector sits on the outside of the enclosure — flush-mounted, protected, and accessible. Connect any Battery Tender® charger to the exterior quick disconnect in seconds, charge through the cable, and disconnect cleanly when done. The protective cap covers the connector when not in use.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorcycles and sport bikes with underseat battery compartments requiring fairing removal for battery access\u003c\/li\u003e\n\u003cli\u003eATVs and UTVs with enclosed battery bays\u003c\/li\u003e\n\u003cli\u003ePersonal watercraft with restricted battery access\u003c\/li\u003e\n\u003cli\u003eSnowmobiles and off-road vehicles with sealed storage compartments\u003c\/li\u003e\n\u003cli\u003eAny vehicle where battery terminal access requires disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Chargers and Accessories\u003c\/h3\u003e\u003cp\u003eAll Battery Tender® chargers with SAE quick disconnect output — Junior family, Plus family, Junior Multi-Chemistry, Weather Resistant, WaveCharge Standard line, and any SAE J563-compatible charger or accessory. Works with all Battery Tender® SAE quick disconnect extension cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":41480307343458,"sku":"081-0190-BT","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-quick-disconnect-cable-mount-081-0190-bt-31068965994594.png?v=1738849179"},{"product_id":"5-ft-extension-cord-for-powerplus-battery-chargers-14-gauge-weatherproof-for-industrial-outdoor-and-marine-applications-5-foot-extension-cable","title":"PowerPlus 5ft Extension Cable","description":"\u003cp\u003eExtends the output cable of any Battery Tender® PowerPlus on-board charger by 5 feet using a heavy-gauge cable and connector assembly built for the PowerPlus line's high-output, high-IP-rated installation environments. When the PowerPlus charger is mounted at a distance from the battery — in a separate equipment bay, at a centralized charging panel, or in a location dictated by AC power access — the 5ft extension provides the additional reach without compromising connection quality or weatherproof integrity.\u003c\/p\u003e\u003ch3\u003eBuilt for High-Output On-Board Applications\u003c\/h3\u003e\u003cp\u003eThe PowerPlus extension cable is rated for the higher amperage output of the PowerPlus line — up to 26 Amps at 12V — with heavy-gauge conductors and sealed connectors matched to the PowerPlus line's IP-rated connector standard. Not interchangeable with standard SAE quick disconnect extension cables.\u003c\/p\u003e\u003ch3\u003eCompatible Battery Tender® Chargers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBattery Tender® PowerPlus 12V 26 Amp\u003c\/li\u003e\n\u003cli\u003eBattery Tender® PowerPlus 24V 20 Amp\u003c\/li\u003e\n\u003cli\u003eBattery Tender® PowerPlus 36V 18 Amp\u003c\/li\u003e\n\u003cli\u003eBattery Tender® PowerPlus 48V 15 Amp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cp\u003eCommercial vehicles and trucks with centralized charging panel installations where battery access requires additional cable reach, marine vessels with PowerPlus chargers mounted in engine rooms and battery banks in forward or aft compartments, industrial equipment and forklifts where the charger mounting location is separated from the battery by equipment structure, and golf carts and utility vehicles where the PowerPlus charger is mounted remotely from the battery bank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":51650421916017,"sku":"081-0209-5","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/battery-tender-default-title-5-ft-extension-cord-for-powerplus-battery-chargers-081-0209-5-59635482263921.png?v=1738849192"},{"product_id":"charge-n-start-4120-4-amp-battery-charger-1200-amp-jump-starter","title":"Charge N Start 4120 — 4 Amp Battery Charger \u0026 1200 Amp Jump Starter","description":"\u003cp\u003eThe most capable unit in the Charge N Start lineup. The Battery Tender® Charge N Start 4120 combines a 4 Amp ISM smart battery charger with 1200 Amps of portable lithium jump starting power — four times the charging output of the CNS 1100 and 1120, same 1200 Amp jump starting power as the CNS 1120. Faster battery recovery for larger vehicles. Maximum jump starting power. The complete battery charger and jump starter solution in one portable unit.\u003c\/p\u003e\u003ch3\u003eTwo Devices. Maximum Output. One Unit.\u003c\/h3\u003e\u003cp\u003eAs a \u003cstrong\u003e4 Amp ISM smart battery charger and maintainer\u003c\/strong\u003e, it recovers and maintains larger automotive batteries significantly faster than 1 Amp alternatives. As a \u003cstrong\u003e1200 Amp portable lithium jump starter\u003c\/strong\u003e, it starts full-size vehicles with gas engines up to 6.0L and diesel engines up to 4.0L without jumper cables or a second vehicle.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Car — 1200 Amps Without Jumper Cables\u003c\/h3\u003e\u003cp\u003eJump starting a dead car battery with the CNS 4120:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConnect the red jump start clamp to the positive (+) terminal on the dead battery\u003c\/li\u003e\n\u003cli\u003eConnect the black jump start clamp to a ground point or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eSpark-proof technology confirms connection — reverse polarity protection prevents damage from incorrect connections\u003c\/li\u003e\n\u003cli\u003eCrank for up to 5 seconds per attempt with 30 seconds between attempts\u003c\/li\u003e\n\u003cli\u003eOnce running, disconnect and store\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eNo second vehicle. No cable management. 1200 Amps handles the full range of passenger cars, trucks, and SUVs with gas engines up to 6.0L and diesel engines up to 4.0L.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Motorcycle, ATV, or Powersports Vehicle\u003c\/h3\u003e\u003cp\u003eThe CNS 4120's 1200 Amp lithium jump pack is among the most powerful portable motorcycle and powersports jump starters available — more than sufficient for any 12V powersports battery:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eAccess the battery — remove the seat or open the battery compartment\u003c\/li\u003e\n\u003cli\u003eConnect the red jump start clamp to the positive (+) terminal\u003c\/li\u003e\n\u003cli\u003eConnect the black clamp to a clean frame ground point or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eCrank for no more than 3–5 seconds — small powersports batteries respond immediately to lithium jump pack power\u003c\/li\u003e\n\u003cli\u003eOnce running, disconnect and secure the compartment\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eThe CNS 4120's 4 Amp ISM charger is particularly well-suited for powersports applications where the battery is used infrequently and benefits from faster recovery after seasonal storage. Motorcycles, ATVs, UTVs, side-by-sides, personal watercraft, and snowmobiles stored for weeks or months are among the highest-risk dead battery scenarios — ISM maintenance charging at 4 Amps keeps them at full capacity and reduces the need for the jump start function over time.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Truck or Large SUV\u003c\/h3\u003e\u003cp\u003eFor full-size trucks, diesel pickups, and large SUVs with high-capacity batteries, the 4 Amp charger recovers depleted batteries more than three times faster than 1 Amp alternatives, and 1200 Amps provides ample cranking power for cold starts and marginally charged batteries:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eLocate the battery — typically under the hood, occasionally in the truck bed or under the seat\u003c\/li\u003e\n\u003cli\u003eConnect red clamp to positive (+), black clamp to ground or negative (−)\u003c\/li\u003e\n\u003cli\u003eSpark-proof confirmation before current flows\u003c\/li\u003e\n\u003cli\u003eCrank for up to 5 seconds with 30-second intervals between attempts\u003c\/li\u003e\n\u003cli\u003eDisconnect once running\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eCNS 4120 vs CNS 1120 — Why 4 Amp Charging Matters\u003c\/h3\u003e\u003cp\u003eBoth units deliver 1200 Amps of jump starting power. The CNS 4120's 4 Amp charger recovers large automotive batteries more than three times faster during bulk charge — meaningful for trucks, SUVs, RVs, and boats where 1 Amp recovery takes significantly longer.\u003c\/p\u003e\u003ch3\u003eTwo Separate Clamp Sets — Not Interchangeable\u003c\/h3\u003e\u003cp\u003eDedicated charging clamps for ISM maintenance. Dedicated jump start clamps for 1200 Amp cranking. Not interchangeable — engineered for their specific functions.\u003c\/p\u003e\u003ch3\u003eInternal Lithium Jump Pack — Auto-Switch Keeps It Ready\u003c\/h3\u003e\u003cp\u003eThe Charge N Start 4120 automatically switches between charging the external vehicle battery and topping up the internal jump pack when it detects the internal level has dropped — ensuring 1200 Amps of jump starting power is always available when needed.\u003c\/p\u003e\u003ch3\u003eThe Prevention and the Cure — At Full Output\u003c\/h3\u003e\u003cp\u003e4 Amp ISM prevents sulfation across all battery sizes. 1200 Amp jump pack handles unexpected failures. One unit, both outcomes, maximum output.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry Charging: Lead-Acid and Lithium\u003c\/h3\u003e\u003cp\u003eThe 4 Amp smart charger supports both lead-acid and Lithium (LiFePO4) battery chemistries with a manual selector delivering the correct ISM charging profile for each type. Compatible battery size range: 14Ah to 100Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Smart Charging at 4 Amps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Battery health check and polarity confirmation before charging begins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 4 Amp output restores depleted capacity efficiently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers automatically as the battery approaches full charge, preventing overcharge damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct maintenance protocol for the selected chemistry delivered 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePassenger cars and trucks up to 6.0L gas \/ 4.0L diesel\u003c\/li\u003e\n\u003cli\u003eMotorcycles and touring bikes\u003c\/li\u003e\n\u003cli\u003eATVs, UTVs, and off-road vehicles\u003c\/li\u003e\n\u003cli\u003eBoats and marine vessels\u003c\/li\u003e\n\u003cli\u003eRVs and campers\u003c\/li\u003e\n\u003cli\u003eAny 12V lead-acid or Lithium battery from 14Ah to 100Ah\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Lithium Outperforms Lead-Acid Jump Boxes\u003c\/h3\u003e\u003cp\u003eConsistent peak Amps in cold weather when lead-acid units lose capacity most. Months of charge retention in storage. Fraction of the weight of lead-acid units. Stays ready through continuous wall-connected maintenance charging without degradation.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof connection on both clamp sets\u003c\/strong\u003e — no current flows until connection is confirmed correct\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection on both clamp sets\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eETL and CETL certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":52171286774129,"sku":"030-7020-WH","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/030-7020-WH_wClips.jpg?v=1741366869"},{"product_id":"1500-amp-jump-starter-ring-terminal-bundle","title":"Motorcycle and Powersports Jump Starter Bundle (1500 Amps)","description":"\u003cdiv class=\"product-info__description\"\u003e\n\u003cdiv class=\"prose\"\u003e\n\u003cdiv id=\"product-description\"\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Motorcycles \u0026amp; Powersports\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bundle pairs our 2000 AMP Jump Starter - 16000mAh Power Bank with a quick disconnect ring terminal cable for easier jump starting on rides with hard to reach batteries. Once installed, the ring terminal harness provides an easy-access lead that eliminates the need to remove seats or side panels to reach the battery for a jump. A perfect set up for street bikes, cruisers, ATVs, UTVs, and more.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNever feel unprepared again with this durable lithium-powered Battery Tender® 1500 AMP Jump Starter and Power Bank. Fits in your glove compartment or under your seat, yet strong enough to start any 12 volt battery on gas and diesel engines up to a V8. This product is safe and easy to use with motorcycles, cars, SUVs, trucks, and RVs.\u003c\/p\u003e\n\u003cp\u003eGone are the days of asking for a jump and connecting to another battery with cumbersome jumper cables. Simply connect each alligator clip to the corresponding terminal on your vehicle’s battery and start up the engine. Spark proof and reverse polarity protection gives you peace of mind and ensures you’re connecting to the correct terminal before the jump starter kicks in.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eJUMP START \u0026amp; CHARGE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePeak current of 1500 AMPs; fast-charge your electronic devices on the go with 3 USB outputs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for 12 volt batteries up to 7.0L gas and 5.5L diesel engines - ideal for cars, SUVs, trucks, boats, and more; able to charge via USB, type C, AC, and DC devices on the go    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAFE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpark-proof and reverse polarity protection ensures no charge is sent unless the alligator clips are connected correctly to the battery\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARGING PORTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eType C (in and out), USB 2.4 AMP and USB 3 AMP Quick Charge ports,12V DC, and 12V jump start\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e+ Battery Tender® Ring Terminal Jump Starter Accessory Cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor use with any Battery Tender® portable jump starter. Securely attach this mountable two-foot-long ring terminal accessory cable to any 12V battery and jump start your bike, ATV, or UTV without removing the seat. Great for riders who want to be prepared with a quick and easy jump start connection.\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents Warning: Cancer and Reproductive Harm - \u003ca rel=\"noreferrer noopener\" href=\"http:\/\/p65warnings.ca.gov\/\" target=\"_blank\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":62804782055793,"sku":null,"price":182.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/030-2020-WH_and_081-0177.png?v=1765830119"},{"product_id":"2000-amp-jump-starter-ring-terminal-bundle","title":"Motorcycle and Powersports Jump Starter Bundle (2000 Amps)","description":"\u003cp\u003e\u003cstrong\u003eDesigned for Motorcycles \u0026amp; Powersports\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bundle pairs our 2000 AMP Jump Starter - 16000mAh Power Bank with a ring terminal cable for easier jump starting on rides with hard to reach batteries. Once installed, the ring terminal harness provides an easy-access lead that eliminates the need to remove seats or side panels to reach the battery for a jump. A perfect set up for street bikes, cruisers, ATVs, UTVs, and more.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e2000 AMP Jump Starter - 16000mAh Power Bank\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNever feel unprepared again with this durable lithium-powered Battery Tender® 2000 AMP Jump Starter and Power Bank. Fits in your glove compartment or under your seat, yet strong enough to start any 12 volt battery on gas and diesel engines up to a V8. This product is safe and easy to use with motorcycles, cars, SUVs, trucks, and RVs. \u003cbr\u003e\u003cbr\u003eGone are the days of asking for a jump and connecting to another battery with cumbersome jumper cables. Simply connect each alligator clip to the corresponding terminal on your vehicle’s battery and start up the engine. Spark proof and reverse polarity protection gives you peace of mind and ensures you’re connecting to the correct terminal before the jump starter kicks in.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eJUMP START \u0026amp; CHARGE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePeak current of 2000 AMPs; fast-charge your electronic devices with 3 USB outputs    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for 12 volt batteries up to 8.0L gas and 6.5L diesel engines - ideal for cars, SUVs, trucks, boats, and more; able to charge via USB, type C, AC, and DC devices on the go    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAFE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpark-proof and reverse polarity protection ensures no charge is sent unless the alligator clips are connected correctly to the battery    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARGING PORTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eType C (in and out), USB 2.4 AMP and USB 3 AMP Quick Charge ports,12V DC, and 12V jump start\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e+ Battery Tender® Ring Terminal Jump Starter Accessory Cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor use with any Battery Tender® portable jump starter. Securely attach this mountable two-foot-long ring terminal accessory cable to any 12V battery and jump start your bike, ATV, or UTV without removing the seat. Great for riders who want to be prepared with a quick and easy jump start connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Residents Warning\u003c\/strong\u003e: Cancer and Reproductive Harm - \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":62825487171953,"sku":null,"price":209.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/030-2030-WH_and_081-0177.png?v=1766428647"},{"product_id":"800-amp-jump-starter-inflator-ring-terminal-bundle","title":"Motorcycle \/ Powersports Emergency Roadside Jump Starter \u0026 Tire Inflator Bundle (800 Amps)","description":"\u003cp\u003e\u003cstrong\u003eDesigned for Motorcycles \u0026amp; Powersports\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bundle pairs our 800 AMP Jump Starter and Tire Inflator with a quick disconnect ring terminal cable for easier jump starting on rides with hard to reach batteries. Once installed, the ring terminal harness provides an easy-access lead that eliminates the need to remove seats or side panels to reach the battery for a jump. A perfect set up for street bikes, cruisers, ATVs, UTVs, and more.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e800 AMP Jump Start and Tire Inflator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNever feel unprepared again with this portable Battery Tender® 800 AMP Jump Starter and Tire Inflator. Small enough to fit in your center console or trunk storage, yet powerful enough to jump start any 12 volt battery on gas and diesel engines up to a V8 or inflate a standard tire from flat to full in eight minutes. Safe and easy to use with cars, SUVs, trucks, and more.\u003c\/p\u003e\n\u003cp\u003eGone are the days of asking for a jump and connecting to another battery with cumbersome jumper cables. No more stopping at the gas station to add air to your tires. To jump start, simply connect the alligator clips to the corresponding terminal on your vehicle’s battery and start up the engine. Spark proof and reverse polarity protection gives you peace of mind and ensures you're connecting to the correct terminal before the jump starter kicks in.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTWO FUNCTIONS, ONE DEVICE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInnovative design allows for multi-purpose use as an emergency jump starter as well as a powerful tire inflator up to 140psi  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to jump start 12 volt batteries up to 4.0L gas and 2.0L diesel engines and inflate tires up to 140psi - ideal for cars, SUVs, trucks, boats, and more; able to charge USB powered devices on the go   \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAFE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpark-proof and reverse polarity protection ensures no charge is sent unless the alligator clips are connected correctly to the battery    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARGING PORTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eType C (in and out), USB, 12V DC, and 12V jump start\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e+ Battery Tender® Ring Terminal Jump Starter Accessory Cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor use with any Battery Tender® portable jump starter. Securely attach this mountable two-foot-long ring terminal accessory cable to any 12V battery and jump start your bike, ATV, or UTV without removing the seat. Great for riders who want to be prepared with a quick and easy jump start connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Residents Warning\u003c\/strong\u003e: Cancer and Reproductive Harm - \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":62825551954289,"sku":null,"price":204.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/030-3010-WHand081-0177.png?v=1766430369"}],"url":"https:\/\/www.batterytender.com\/collections\/overlanding-portable-power.oembed?page=2","provider":"Battery Tender®","version":"1.0","type":"link"}